隨著時代的發展和科技的進步，我們的家用電器日益增多，對電能的需求也越來越大，線路的延展越來越長，拓?fù)浣Y(jié)構越來越復雜。下面地埋探測廠家就來講講一種地埋電纜探測設備的制作方法。

With the development of the times and the progress of science and technology, our household appliances are increasing, the demand for electric energy is also growing, the extension of lines is getting longer and longer, and the topology is getting more and more complex. The following is a method of making buried cable detection equipment.

由于地下敷設電纜不占空間，現代化大都市大多采用地埋電纜代替高空架設電纜，尤其是居民區、商業區、工業區等地方。而現代化大都市大多采用地埋電纜代替高空架設電纜，這就給電纜故障檢修、增容等帶來諸多不便。

Because underground cable laying does not take up space, most modern metropolises use buried cables instead of overhead cables, especially in residential areas, commercial areas, industrial areas and other places. Most modern metropolises use buried cables instead of overhead cables, which brings a lot of inconvenience to cable troubleshooting and capacity expansion.

特別是設計施工圖紙遺失，或者缺少相關文檔資料的，更是大大增加了施工難度。這就導致了一旦出現故障，不能快速判斷電纜路徑以及電纜的深度，不能快速對電纜路徑和故障點進行定位，往往需要人工大面積挖掘，費時費力。主要提供了一種地埋電纜探測設備用以上述背景技術中提出的技術問題。

In particular, the loss of design and construction drawings or the lack of relevant documents greatly increases the construction difficulty. This results in that once a fault occurs, the cable path and cable depth cannot be quickly determined, and the cable path and fault point cannot be quickly located. It often requires manual excavation in a large area, which is time-consuming and laborious. This paper mainly provides an underground cable detection equipment to solve the technical problems raised in the above background technology.

一種地埋電纜探測設備，包括有發射模塊以及依次電連接的信號采集模塊、信息處理模塊、微處理器和顯示模塊,所述發射模塊包括有承接箱，所述承接箱的內部固定有發射機，所述發射機與所述承接箱的內壁之間形成有儲納槽，所述信號采集模塊包括有連接桿，所述連接桿位于所述儲納槽的槽體內部，所述連接桿的底端固定有連接頭，所述連接頭的內部固定感應天線和第二感應天線。

An underground cable detection device includes a transmitting module, a signal acquisition module, an information processing module, a microprocessor and a display module which are electrically connected in turn. The transmitting module includes a receiving box, the inside of which is fixed with a transmitter. A storage tank is formed between the transmitter and the inner wall of the receiving box. The signal acquisition module includes a connecting rod which is located inside the tank body of the storage tank, The bottom end of the connecting rod is fixed with a connector, and the first induction antenna and the second induction antenna are fixed inside the connector.

具體操作方式如下：

The specific operation mode is as follows:

使用探測設備對電纜進行測量時，將待測電纜與發射模塊1中的發射機12相連接，使得發射機12輸出16種頻率的正弦交流信號,再手持連接桿22以及接收器31移動電纜的大致安裝區域，由于連接桿22底端通過連接頭23固定有感應天線24和第二感應天線25，感應天線24與第二感應天線25處于同一平面內，并且保持相互垂直時，左右同步平行移動感應天線24以及第二感應天線25，當感應天線24以及第二感應天線25處于待測地埋電纜正上方時接收到的正弦交流信號強；感應天線24接收到的信號為待測地埋電纜到地面的電勢，第二感應天線25收到的信號為待測地埋電纜到地面再加上感應天線24以及第二感應天線25之間的電勢。

When using the detection equipment to measure the cable, first connect the cable to be tested with the transmitter 12 in the transmission module 1, so that the transmitter 12 outputs sinusoidal AC signals of 16 frequencies, and then hold the connecting rod 22 and the receiver 31 to move to the approximate installation area of the cable. Since the bottom end of the connecting rod 22 is fixed with the first inductive antenna 24 and the second inductive antenna 25 through the connector 23, When the first induction antenna 24 and the second induction antenna 25 are in the same plane and are kept perpendicular to each other, the first induction antenna 24 and the second induction antenna 25 are moved synchronously and horizontally. When the first induction antenna 24 and the second induction antenna 25 are directly above the buried cable to be measured, the received sinusoidal AC signal is strong; The signal received by the first inductive antenna 24 is the potential between the buried cable to be measured and the ground, and the signal received by the second inductive antenna 25 is the potential between the buried cable to be measured and the ground plus the potential between the first inductive antenna 24 and the second inductive antenna 25.

上述結合附圖對進行了示例性描述，顯然具體實現并不受上述方式的限制，只要采用了方法構思和技術方案進行的這種非實質改進，或未經改進將構思和技術方案直接應用于其他場合的，均在保護范圍之內。更多相關內容就來我們網站http://m.xqpxqpp.cn進行咨詢了解吧！

The above is illustrated with the accompanying drawings. Obviously, the specific implementation is not limited by the above methods. As long as such non substantial improvement is made by adopting the method concept and technical solution, or the idea and technical solution are directly applied to other occasions without improvement, they are within the scope of protection. More relevant content will come to our website http://m.xqpxqpp.cn Consult and understand!