管道示蹤線的概念,其實大家先可以這樣理解,它是輔助于埋在地下非金屬管道日后維護定位的一種信號線纜。接下來小編為您講解更多相關關事項。
In fact, we can understand the concept of pipeline tracing line in this way. It is a kind of signal cable that assists in the maintenance and positioning of buried non-metallic pipelines in the future. Next, the editor will explain more relevant matters for you.
示蹤線是專為查找與定位地下非金屬管線而設計的產品。它有效地了非金屬管線不能用金屬管線尋管儀探查的問題,可廣泛適用于、供水管線管線及排水管線等地下非金屬管網的查找與定位。
Tracer lines are specially designed for locating and locating underground non-metallic pipelines. It effectively solves the problem that non-metallic pipelines cannot be detected by metal pipeline finder, and can be widely used for locating and locating underground non-metallic pipelines such as water supply pipelines and drainage pipelines.
這什么這幾年及地方大力提倡使用示蹤線產品呢?是因為近幾年地下管網建設的力度不斷加大,造成地下管網錯綜復雜,經常有損壞情況發生,所以管線的業主單位對自己的管線認識提到了一高度。
Why has the country and local governments vigorously advocated the use of trace line products in recent years? In recent years, the construction of the national underground pipe network has been intensified, which has resulted in the complexity of the underground pipe network and frequent damage. Therefore, the owner of the pipeline has raised a high level of awareness of its own pipeline safety.
管道敷設完成后,應使用管道探測器對已敷設之可探示蹤線進行可探性測試,以確保金屬絲已連接妥當,應記錄測試結果。
After the pipeline is laid, the pipeline detector shall be used to test the detectability of the laid tracers to ensure that the metal wires have been properly connected. The test results shall be recorded.
此外微波物理探地雷達無法探測到塑料管道,對于今后維修、其他施工造成障礙,就在塑料管道上附金屬線,提供響應標志。
In addition, the microwave physical ground penetrating radar can not detect the plastic pipe. For obstacles caused by future maintenance and other construction, metal wires are attached to the plastic pipe to provide response signs.
將示蹤線的金屬線與管道定位儀的發射機輸入端連接,而發射機接地端應且盡可能遠離發射機,使用接地樁或者電線桿的接地,以減少接地電阻。用接收器去探測接受發射信號。
Connect the metal wire of the tracer wire with the transmitter input end of the pipe locator, and the transmitter grounding end should be as far away from the transmitter as possible. Use the grounding pile or pole grounding to reduce the grounding resistance. Use the receiver to detect and receive the transmitted signal.
This is all about the concept of pipeline trace line. You can come to our website freely if you have any opinion about it http://m.xqpxqpp.cn Message communication!